Mercedes-Benz 2005 C 240, Operator'S Manual

Page: 275 / 426

273
Operation
Engine compartment
왘
If necessary, add engine oil.
For adding engine oil see (
컄
page 274).
More information on engine oil can be
found in the “Technical data” section
(
컄
page 373) and (
컄
page 375).
Other display messages
If the SmartKey is not turned to position 2
in the starter switch, the following
message will appear:
Switch ignition on to
check engine oil level
왘
Switch on the ignition (
컄
page 33).
If you see the message:
Observe waiting time
왘
If engine is at operating temperature,
wait five minutes before repeating
check procedure.
왘
If engine is not at operating tempera-
ture yet, wait 30 minutes before
repeating check procedure.
If you see the message:
Engine oil level
Not when engine on
왘
Turn off the engine.
왘
If the engine is at operating tempera-
ture, wait five minutes before checking
oil.
왘
If the engine is not at operating temper-
ature yet, you must wait 30 minutes
before checking oil.
If there is excess engine oil with the engine
at normal operating temperature, the
following message will appear:
Engine oil level
Reduce oil level
왘
Have excess oil siphoned or drained
off. Contact an authorized
Mercedes-Benz Center.
More information on messages in the
display concerning engine oil can be found
in the “Practical hints” section
(
컄 page 312) and ( 컄 page 313).
i
If you want to interrupt the checking
procedure, press the
k
or
j
button on the multifunction steering
wheel.
!
Excess oil must be siphoned or drained
off. It could cause damage to the
engine and catalytic converter not
covered by the Mercedes-Benz Limited
Warranty.