Important!
Prior to operating the vehicle, the driver
should adjust the seat height for proper
vision as well as fore/aft placement and
seat back angle to insure adequate
control, reach, operation, and comfort.
The head restraint should also be
adjusted for proper height.
Both the inside and outside rearview
mirrors should be adjusted for adequate
rearward vision. Fasten seat belts.
Infants and small children should be
seated in a properly secured restraint
system that complies with Federal
Motor Vehicle Safety Standard 213.
All seat, head restraint, and rearview
mirror adjustments as well as fastening
of seat belts should be done before the
vehicle is put into motion.
Head Restraints, Rear
Adjust head restraint to support the
back of the head approximately at ear
level. Do not extend the head restraint
past the stop.
For removal of head restraint refer to
“ Practical Hints” , page 88.
Arm Rest
Pull out arm rest using the loop.
For removal of rear seat cushion, see
“ Practical Hints” , page 87.
I
33
O
op
ra
tin
n
Summary of Contents for 190 E 2.3-16 201 1987
