Mercedes-Benz 190 E 2.3-16 201 1987, Owner'S Manual

Page: 34 / 113

Seat and Head Restraint Adjustment:
A Seat cushion adjustment.
B Seatback adjustment.
C Head restraint adjustment.
Adjust head restraint to support the
back of the head approximately at
ear level. The head restraint can
also be turned forward by hand.
Note:
Your car is equipped with electric
head restraints, do not try to oper­
ate manually.
Adjusting Power Seats, Front
The switches are located in each front
door.
Turn key to steering lock position 1 or 2
(with the driver's or front passenger’s
door opened, the power seats can also
be operated with the key removed or in
steering lock position 0).
Warning!
Do not adjust the driver’s seat while
driving. Adjusting the seat while
driving could cause the driver to
lose control of the vehicle.
Never ride in a moving vehicle with
the seat back reclined. The seat
back and seat belts provide the best
restraint, when the wearer is in an
upright position and the belts are
properly positioned on the body.
Storing seat and head restraint posi­
tions in memory (left front seat only):
D Memory button.
E Position buttons “ 1” and “2” .
Two sets of seat/head restraint posi­
tions may be programmed into mem­
ory. After the seat and head restraint
are positioned, push memory button
“ D” , release, and within 3 seconds
push position button “ 1” . A second set
of positions for the same seat and head
restraint can be programmed into
memory by pushing first button “ D”
and then “ 2” .
Recalling seat and head restraint posi­
tions stored in memory:
To recall a seat/head restraint position,
push position button “ 1 ” or “ 2” until
seat/head restraint movement has
stopped. For safety reasons, the seat/
head restraint movement stops after
releasing the position button.
Caution!
Do not remove head restraints except
when mounting seat covers. For
removal refer to “ Practical Hints” ,
page 88. Whenever restraints have
been removed be sure to reinstall them
before driving.
32