X
Press button
;
for the exterior mirror on
the front-passenger side.
X
Use adjustment button
=
to adjust the
exterior mirror. You should see the rear
wheel and the kerb in the exterior mirror.
X
Press memory button M
?
and one of the
arrows on adjustment button
=
within
three seconds.
The parking position is stored if the exterior
mirror does not move.
X
If the mirror moves out of position, repeat
the steps.
Calling up a stored parking position
X
Turn the key to position 2 in the ignition
lock (
Y
page 157).
X
Adjust the exterior mirror on the front-
passenger side with the corresponding but-
ton (
Y
page 113).
X
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger
side moves back to its original position:
R
as soon as you exceed a speed of
15 km/h
R
about ten seconds after you have disen-
gaged reverse gear
R
if you press button
:
for the exterior mir-
ror on the driver's side.
Memory function
Important safety notes
G
WARNING
If you use the memory function on the driver's
side while driving, the adjustments could
cause you to lose control of the vehicle. There
is a risk of an accident.
Only use the memory function on the driver's
side while the vehicle is stationary.
G
WARNING
If the memory function adjusts the seat, you
and other vehicle occupants – particularly
children – could become trapped. There is a
risk of injury.
While the memory function is making adjust-
ments, make sure that no one has any part of
their body within the sweep of the seat. If
someone becomes trapped, immediately
release the memory function position button.
The adjustment is stopped.
G
WARNING
If children activate the memory function, they
could become trapped, especially if they are
unattended. There is a risk of injury.
When leaving the vehicle, always take the key
with you and lock the vehicle. Never leave
children unattended in the vehicle.
The memory function can be used at any time,
e.g. even when the key is not in the ignition
lock.
Storing settings
With the memory function, you can store up
to three different settings, e.g. for three dif-
ferent people.
The following settings are stored as a single
memory preset:
R
seat and backrest position
R
driver's side: position of the exterior mir-
rors on the driver's and front-passenger
sides
116
Memory function
Seats,
steering
wheel
and
mirrors
