![background image](http://html1.mh-extra.com/html/merach/mr-526/mr-526_instruction-manual_1771279014.webp)
12
Step 8: Installation of kettle holder/fixed handle/electronic meter
1. Firstly, removing the screws (29) from the handlebar stand pipe(30), aligning the hole and fixing the kettle holder (28)
on the handlebar stand pipe with the screws (29) according to the figure.
2. Fixing the fixed handle (3) on the handlebar stand pipe(30) with screws (10) and spring washers (14), tightening it with
an Allen wrench (99). Passing the hand-held heartbeat line (20) into the corresponding position of the handlebar stand
pipe(30), and fixing it with the line clamping plug (18).
3. Removing the fixed screws (17) on the back of the electronic meter(1) in advance, connecting the upper flat cable (31)
with the flat cable corresponding to the electronic meter (1), and the hand-held heartbeat line
(
20) with the hand-held
heartbeat line corresponding to the electronic watch (1). In the end, fixing the electronic meter(1) on the handlebar
stand pipe frame (31) with the previously removed screws (17). See the figure for details.
4. Loading batteries into the battery box behind the electronic meter(1). Installation is done.
STEP 8
1
17
20
10
14
31
28
29
3
30
18
18
14
10
17