Step 5 Installation of upper armrest, pedal tube and M piece
1. Placing the upper armrest (9R) into the position corresponding to the lower swing (25R), and fastening the other side
with screws (15) and spring washer(14) as in the previous step. (Refer to the following figure for installation)
2. Putting the rear end of the pedal tube (34R) into the U-shaped opening of the M piece (44R), and then successively
penetrating into the corresponding hole position with the inner hexagon screws (42), after that, screwing into inner
hexagon screw pumps with the gasket (45) and the nylon cap (46). Locking it with an inner allen wrench (99) and an
open end wrench (100) until it cannot be shaken. The other side is the same as the previous step.
STEP 5
15
14
9R
9L
25L
25L
25R
34L
34R
44R
44L
42
45
46
59
44R
42
45
46
14
15
10