24
Electro Vehicle Data
Only configurable if no RFID card reader is activated /
present or the operating mode “SCU” is active.
Otherwise, the function can be set in the “Whitelist”
menu.
VALUE
Description
No. of Vehicle
Phases
Selection: Number of phases with which
the vehicle charges
Minimum
Current per
Phase
Selection: Minimum charging current
per phase, which the vehicle needs for
charging
Maximum
Current per
Phase
Selection: Maximum charging current
per phase, which the vehicle needs for
charging
EV Wake-Up
Wake-up function activated
Wake-up function deactivated
If the wake-up function is activated, older
vehicles can be switched from standby
mode to continue charging.
Some vehicles may respond
incorrectly to the wake-up signal.
MENNEKES it is not liable for the
correct reaction on the vehicle
side.
Integration into the home network via LAN
Ethernet Settings
VALUE
Description
Use Static IP
Address
Use static IP address
Do not use static IP address
Static IP Address
Input: Static IP address
Static Netmask
Input: static network address
Static Gateway
Address
Input: IP address of the router
The following data is displayed in the submenu “Ethernet
Status”:
Ethernet IP Address
Ethernet Subnet Mask
Ethernet Gateway IP Address
Source of Ethernet IP Address
Ethernet MAC Address
Network connection through access point
WLAN Access Point Mode Settings
Value
Description
Network Name /
SSID
Input: Network name of the WLAN that
the device makes available
Channel
Selection: WLAN channel during the
operation of the device as an access
point
Security Mode
Selection: WLAN encryption.
Country of
Operation
Selection: Country in which the device
is operated
