Mendota E-FV44I ECHO SERIES, Installation & Operating Instructions Manual

Page: 30 / 48

Part #85-03-00855 29
REMOTE TRANSMITTER OPERATING INSTRUCTIONS
TO TURN ON THE APPLIANCE :
1. Press the ON/OFF button. The transmitter display will show all active icons on the screen.
2. Select the Thermostat Mode by pressing the Thermostat Key: OFF (meaning Manual Mode), ON
(meaning normal Thermostat) or Smart (meaning Smart Mode).
a. In OFF (Manual Mode), the appliance will ignite and start on HI.
b. In ON (Normal Thermostat Mode), the appliance will only ignite if the Set Temperature is
greater than the Room Temperature.
c. In SMART (Smart Mode), the appliance will only ignite if the Set Temperature is greater than
the Room Temperature.
TO TURN OFF THE APPLIANCE
, press the ON/OFF button.
MODE KEY:
Pressing the MODE KEY toggles between the various available functions: Temperature Setting
and Flame Height Setting.
Temperature Setting:
Press the Mode Key until the large Set Temperature is dis-
played. Pressing the Up or Down button once in this mode will increase or decrease the
set temperature. Note that the large temperature display in the center of the screen is the
Set Temperature. The smaller temperature display in the top right corner is the room tem-
perature that the hand held transmitter has sensed.
Flame Height:
6 flame height Levels are available. While the Flame Height
Icon is displayed, pressing the Up or Down button once will increase or decrease
the flame height by 1 of 6 increments. In Manual Mode, if the flame height is at
Level 1 and the Down button is pressed, all burners will turn OFF. If in IPI mode,
the pilot light will also extinguish. If in Standing Pilot Mode, the pilot light will re-
main ON. Note: If in SMART model, the flame height function is not available for
manual adjustment. In SMART mode, the flame height regulates automatically. In Ther-
mostat mode, you will be able to reduce the flame height down to the Level 1 setting but
you will not be able to turn the burner off.
70
67°
F
ON