19
3.3
Advanced Operations and Information
Protocol Run Information and Status
When a protocol is running, the screen will display
the protocol information and status.
During the running of the protocol, the MEND Professional
TM
uses two
LED lights to indicate the output connection. If the channel status LED
CH1 or CH2 turns on or flashes, check that your leads are inserted firmly
into the jacks and your leads are plugged into the conductive material.
The common problems are loose plugs, plugs are not inserted, the button
or push pin is not inserted into gloves or electrodes, dry skin contact needs
moisture or broken wires.
The device senses the insertion of the plugs in the output jacks. If they are
not connected a message will appear on the LCD screen. And the LCD
lights flash very fast. Slower flashing lights indicate poor conductivity.
Remaining time for the running
frequency pair (Pair 1 of 10)
Output Current
polarity
(
±
)
and
intensity
(
μA
)
Output
channel
frequencies
Protocol number and name
Remaining time for all 10
frequency pairs in the
protocol
Waveform
name
