10
Arrows:
LEFT arrow key:
Back
to previous menu level or move cursor
to the left.
RIGHT arrow key:
Enter
into menu selection or move cursor
to the right.
UP arrow key: Move cursor up or increase number
DOWN arrow key: Move cursor down or decrease number
Number SET: Press the Number SET key to finish editing the
protocol number. In Number SET mode, use the arrow keys or
numeric keys to change the digits of the frequency numbers or
parameters. Press this key again to move to the next number or to
finish entering numbers or parameters. In Manual Run Mode, use
the Number SET key to enter the CH1 and CH2 frequencies after
they are selected on the number pad.
Protocols: Press this key to cycle between “All Protocols”, “Recent
Protocols” and “History Protocols”.
0~9: Number Keypad to input protocol number, select a numbered
menu item enter CH1/CH2 frequencies in Manual Mode.
Function keys: CH1, CH2, Current +/-, Time +/-, WF(waveform),
POL(polarity): During manual operation or run time control, use
these keys to change respective parameters.
Function keys: HLD (hold), SKP (skip): While protocols are
running, use the HLD key to hold/release the timer and use the SKP
to advance to next frequency pair in a protocol.
