24
To change frequency pair duration
: Each frequency pair time is
programmed in the protocol. Press function key 3 and 6 respectively for
T+ and T– to increase and decrease by 1 minute while the protocol is
running.
To HOLD on a frequency pair
: press the 5 function key (HLD) to hold
on the frequency pair. The timer will hold, however, there will still be
microcurrent flowing at the outputs. Press HLD again to resume the timer.
To stop running
: press STOP key at any time. The elapsed time and
remaining time will stay in the manual run prepare screen. Frequency pairs
default to a 30 minute run time.
Exit Manual Run Mode
: press STOP again to go back to the Main Menu.
