20
Run Time Changes During a Protocol
To change F1 frequency:
Press CH1, the edit cursor will jump to the F1
frequency value. Enter the digits of the new frequency value. For example,
to enter frequency 970.0Hz, press CH1, then 9, 7, 0, 0 and SET.
To change F2 frequency:
Press CH2, the edit cursor will jump to F2
frequency value. Then enter the digits of the new frequency value. For
example, to enter 52.9Hz, press CH2, then 5, 2, 9 and SET.
To change output current intensity:
Press the 9 function key(+) to
increase current intensity or press the 6 function key(-) to decrease the
current intensity. Or press the Number SET key until the edit cursor has
moved to the output current position, and then use the number keys or
arrow keys to change the value.
To change polarity:
Press the 4 function key (POL) to cycle through the
output polarity between ± (alternating), + (polarized positive) and –
(polarized negative).
