MEN BL51E User Manual Download Page 34

Page: 34 / 110

Getting Started

20BL51E00 E2



2020-03-27

Page 34

2.5

Installing Operating System Software

By default, no operating system is installed on the BL51E.

2.6

Installing Driver Software

For a detailed description on how to install driver software, please refer to the respective

documentation of the software package to be installed.

2.7

MDIS System Package

The BL51E is supported by the MDIS framework.
MDIS stands for MEN Driver Interface System and is a framework for device drivers for

almost any kind of I/O hardware. It greatly simplifies system configuration, also in

combination with specialized board BSPs.



Please refer to the respective manufacturer's documentation on how to

implement the operating system.



See the MEN website for all available software:

www.men.de/products/bl51e/#downl

See the MEN website for all available software:

www.men.de/products/bl51e/#downl

See the

MEN website

for more information on MDIS.

Summary of Contents for BL51E















































































































Search results

Summary of Contents for BL51E

Reviews:

Related manuals for BL51E

Brands by name

Popular brands

MEN BL51E, User Manual

Search results

Summary of Contents for BL51E

Reviews:

Related manuals for BL51E

Brands by name

Popular brands