MEN BL51E User Manual Download Page 23

Page: 23 / 110

Getting Started

20BL51E00 E2



2020-03-27

Page 23

2.2

Configuring the Hardware

Check your hardware requirements before mounting the BL51E. Modifications are

difficult or impossible to do when the BL51E is mounted.

2.2.1

Installing an SD Card

The following steps are necessary:

Loosen the cover plate using the two knurled screws and put it aside in direction of

the arrow printed on the cover plate.

Insert the card into the slot with the contacts facing the PCB.

Make sure the card clicks into place properly.

To eject the card, push it until it springs out, then pull the card out of the slot.

MEN offers suitable accessory articles for BL51E.

See the MEN website for ordering information:

www.men.de/products/bl51e/#ord

Card slot

SD card

Summary of Contents for BL51E















































































































Search results

Summary of Contents for BL51E

Reviews:

Related manuals for BL51E

Brands by name

Popular brands

MEN BL51E, User Manual

Search results

Summary of Contents for BL51E

Reviews:

Related manuals for BL51E

Brands by name

Popular brands