DMU380SA Series
User’s Manual
________________________________________________________________________
Doc# 7430-0026 Rev. 01
Page 14
Unit orientation selections must conform to the right hand coordinate system as noted in
Section 4.1 of this user manual. Selecting orientations that do not conform to this criteria
are not allowed.
Figure 7.
Unit Configuration
Advanced Configuration
3.10
Users who wish to access some of the more advanced features of NAV-VIEW and the
DMU380SA Series products
can do so by selecting the “Advanced” tab at the top of the
“Unit Configuration” window.
WARNING
Users are strongly encouraged to read and thoroughly understand the consequences of
altering the settings in the “Advanced” tab before making changes to the unit
configuration. These settings are discussed in detail in Chapter 4 below.
Behavior switches are identified at the top of the page with marked boxes. A blue box
will appear if a switch has been enabled similar to Figure 8 below. The values can be set
in the same manner as noted in the previous section. To set a value, users select the
appropriate “Modify” checkbox on the left side of the menu and selec
t or enable the
appropriate value they wish to set. At the bottom of the page, users have the option of
temporarily or permanently setting values. When all selections have been finalized,
simply press the “Set Values” button to change the selected settings
.
