Memorex MPH-6996 Owner'S Manual Download Page 55

Page: 55 / 61

Additional information

(continued)

Troubleshooting

If your phone is not performing to your expectations, please try these simple steps first.

Symptom

The status light won't come on
when the handset is placed in
the base unit.

The audio sounds weak and/or
scratchy.

Can't make or receive calls

The handset doesn't ring or
receive a page.

The Caller ID disappears.

The Caller ID does not display.

Severe noise interference.

Suggestion

• Make sure the AC adapter is plugged into the

base unit and wall outlet.

• Make sure the handset is properly seated in

the base unit.

• Make sure the charging contacts on the

handset and base unit are clean.

• Make sure that the base unit antenna is in a

vertical position.

• Move the handset and or base unit to a

different location away from metal objects or
appliances and try again.

• Press to help eliminate background

noise.

• Make sure that you are not too far from the

base.

• Check both ends of the base unit telephone

line cord.

• Make sure the AC adapter is plugged into the

base unit and wall outlet.

• Disconnect the AC adapter for a few minutes,

then reconnect it.

• Reset the digital security code (See page 50).
• Make sure

is pressed.

• The battery pack may be weak. Charge the

battery on the base unit for 15-20 hours.

• The handset may be too far away from the

base unit.

• Place the base unit away from appliances or

metal objects.

• Reset the digital security code (See page 50).

• The handset was picked up before the second

ring.

• The call was placed through a switch board.
• Call your local telephone company to verify

your Caller ID service is current.

• Keep the handset away from microwave

ovens, computers, remote control toys,
wireless microphones, alarm systems,
intercoms, room monitors, fluorescent lights
and electrical appliances.

• Move to another location or turn off the source

of interference.

UC351BH (MPH6996) OM Eng 8/10/01 5:27 PM Page 54

Summary of Contents for MPH-6996






























































Search results

Summary of Contents for MPH-6996

Reviews:

Related manuals for MPH-6996

Brands by name

Popular brands

Memorex MPH-6996, Owner'S Manual

Search results

Summary of Contents for MPH-6996

Reviews:

Related manuals for MPH-6996

Brands by name

Popular brands