Memorex MPH-6996 Owner'S Manual Download Page 41

Page: 41 / 61

The Answering Machine

(continued)

Press

to select the hour.

Press

until you hear the correct minute setting.

The numbers

through

are displayed on the base as each minute is

announced.

Press

to select the minute.

Press

until you hear the correct AM or PM setting.

The message counter displays

Press

to select the AM/PM.

The phone announces the time that you have set and the base LED
displays [

]. To exit the menu mode, press

if desired.

Setting a Personal Security Code (PIN)

To play your messages from a remote location, you will need to enter a two-digit
Personal Identification Number (PIN) code (00-99). To select a PIN, perform the
following steps:

Press three

times.

The current PIN code is announced as it
is displayed on the base.

Press

to change the PIN code.

The system announces current PIN code.

Press or
until the desired number appears.

Press

to select the PIN code.

The system announces the new PIN
code.

To exit the menu mode, press

if desired.

The PIN code is set to “80” when
you purchase the phone.

Note

UC351BH (MPH6996) OM Eng 8/10/01 5:26 PM Page 40

Summary of Contents for MPH-6996






























































Search results

Summary of Contents for MPH-6996

Reviews:

Related manuals for MPH-6996

Brands by name

Popular brands

Memorex MPH-6996, Owner'S Manual

Search results

Summary of Contents for MPH-6996

Reviews:

Related manuals for MPH-6996

Brands by name

Popular brands