manualshive.com logo in svg

Memorex MPH-6996, Owner'S Manual, Page: 15 / 61

Share
Download
Memorex MPH-6996 Owner'S Manual Download Page 15

14

Step 3 

(continued)

Battery use time (per charge)

From fully charged
• 7 hours continuous use.
• 14 days when the handset is in the standby mode.

When the battery charge becomes low

When the voltage of battery pack is very low and
needs to be charged, the phone eliminates functions
to save power. If the phone is not in use, 
“

Low Battery

” flashes and none of the keys will

operate. If the phone is in use, "

Low Battery

" flashes and the handset beeps.

Complete your conversation as quickly as possible and return the handset to the base
unit for charging.

Notes

• Even when the battery pack is not being used, it will gradually discharge over a long

period. For optimum performance, be sure to return the handset to the base unit after
a telephone call for charging the battery.

• To avoid memory loss, replace the battery pack within 30 minutes.

Cleaning the battery contacts

To maintain a good charge, it is important to clean all battery contacts on the handset
and base unit with a pencil eraser or other contact cleaner, if necessary, about once
a month.              

Do not use any liquids or solvents.

UC351BH (MPH6996) OM Eng  8/10/01  5:25 PM  Page 14

Summary of Contents for MPH-6996






























































Reviews:

No comments