32
03/2021
Operation and control
5.3.3 Program
mode
In this operating mode, programmes saved in the appliance can be started with
different combinations of individual parameters (temperature, humidity, interior
lighting) at staggered intervals, which the appliance then automatically process-
es in sequence. These programs are not created directly at the appliance but ex-
ternally at a computer / laptop and using AtmoCONTROL software. Transfer to
the appliance is possible using the provided USB storage medium or via Ethernet.
■
A description of how to create and save programs can be found in the separate
AtmoCONTROL software manual
Starting a programme
0
%
manueller Betrieb
%
Fr 20.10.2010 20:31
Manual mode
17:44
13.Sept.2012
Activate
1. Press the activation key on the right of the status display. The current operating
mode is highlighted automatically, in this example Manual Mode ( ).
Test 012
ready
10:44
12.Sept.2012
2. Turn the turn control until the
start symbol is highlighted. The current program
is displayed, in this example Test 012.
i
Only the program currently- in menu mode and shown in the display can be used.
If you want to process another program, you need to activate it in menu mode
fi
rst
(description in chapter 7).
Test 012
Ramp 1
10:44
12.Sept.2012
3. To start the program, press the con
fi
rmation key. The program is executed. The
display shows:
■
the program description (
in this example Test 012)
■
the programme segment description, in this example Ramp 1
■
the current run (in case of loops)
i
You cannot change any parameters (e.g. the temperature) at the appliance while
a program is running. However, the displays ALARM and GRAPH can still be used.
