Seite 8 von 20
Installing the printhead
1.
Ensure your printer is switched on and the power button is lit and steady.
2.
Open the cover of your printer to reveal the printhead latch with a screw driver
(ONLY at
first use!)
3.
If the printhead latch is not raised, press the Printhead Eject button for three seconds.
This will automatically initiate printhead latch opening. This process may take several
seconds.
4.
Remove the fluidic cap protectors from the two fluidic couplings.
5.
Open the end of the printhead package outer box and slide out the foil bag.
Inspect the integrity of the foil vacuum sealing. The foil bag should be formed tightly to
the contours of the printhead cartridge as shown above. If the foil is loose to any degree
then the seal has been compromised.
If a poor seal is suspected, DO NOT USE the printhead cartridge. Report the issue to your
supplier.
6.
Carefully rip the foil packaging open at the notch. Use scissors if your foil bag does not
have a notch or you are finding it difficult to tear the bag.
