Seite 2 von 20
Installing the Printer
Choose a location
The iCUBE should be placed on a properly levelled worktable or cabinet which is able to
handle the printer’s weight and minimum 61 cm (24 inch) wide.
Unpacking and Setup
The printer is shipped in a strong cardboard or wooden box. Before opening the box, check that
the box is not damaged in any way and was not turned upside down during shipment. If signs of
damage are found, contact your reseller and inspect the box together.
If the box is undamaged, carefully cut the tape on the box, open the box. Before taking the printer
out of the box, make sure a strong and level work surface is prepared for the printer.
NOTE:
The printer is heavy. Never attempt to lift and take it out of the box on your own as it can
cause lasting injuries. The printer should always be lifted by two persons.
Place the printer on the desk and inspect that no damages are found on the unit.
Checking the contents
Check the parts list to ensure you have received all required components. If the shipment is
complete, proceed to the next chapter.
iCUBE Printer
1 set of CMYKK ink cartridges (5 cartridges per set)
1 printhead
1 main power cable
USB-A to USB-B Cable
Printer and co
n
t
ents
