Seite 12 von 20
Printing Area is dedicated with the green bar. Left edges of Label (Gap) Sensor and
Blackmark (Tickmark) Sensor is shown with the blue marks. During printing the operator has
to align the actual material to these blue marks otherwise the sensors won’t be able to
recognize the media and the printer could run into an error.
Picture of Printing Area
Load Media
Take the paper from the roll and see across under the unwinder’s roller. Don’t forget to do
this because this will strain the label media during printing.
Drag the paper towards the paper guide.
Feed the paper in the printer till feel you
some resistance.
Connect the printer to a computer
