![Member's Mark G70302 Assembly Instructions & User Manual Download Page 9](http://html1.mh-extra.com/html/members-mark/g70302/g70302_assembly-instructions-and-user-manual_1769037009.webp)
1-833-454-0864
9
LEAK TESTING
LIGHTING INSTRUCTIONS
1. Turn all control knobs to “
OFF
”.
2. Ensure that the regulator is securely connected to LP cylinder.
3. Spray a water and soap solution onto hose and regulator and all connections from
the LP tank to the main and side burner manifold.
4. Open LP cylinder valve by turning hand wheel counterclockwise. If you hear
a rushing sound, turn gas off immediately. There is a leak at the connection.
CORRECT BEFORE PROCEEDING
.
5.
If “growing” bubbles appear,
there is a leak. Close LP cylinder valve
immediately and re-tighten connections.
If leaks cannot be stopped do not
try to repair.
Call for replacement parts. Order new parts by providing the serial
number, model number, name and part number of items required (see parts list) to
a
MEMBER’S MARK BARBECUE
CUSTOMER CARE AGENT
1-833-454-0864.
6. Always close LP cylinder valve after performing leak test by turning hand wheel clockwise.
•
Do not smoke during leak test.
•
Do not use an open flame to check for gas leaks.
•
The Griddle must be leak tested outdoors in a well ventilated area, away from ignition sources such as gas fired
electrical appliances.
Lighting Burners
1. Turn all burner control knobs “
OFF
”. (Push in and turn the knobs clockwise to
confirm “
OFF
” position.)
2.
Open LP tank
SLOWLY
. Turn counter clockwise to open. Wait 5 seconds for
pressure to stabilize.
ATTENTION
Leak Test must be repeated each time the LP cylinder is exchanged or refilled.
WARNING
Before you light this griddle, turn all control knobs to the “
OFF
” position and close the LP Cyclinder.
Failure to follow proper lighting sequence will activate the regulators “
FLOW LIMITING DEVICE
” feature,
and require a reset (See page 8).
ATTENTION
If there is excessive abrasion or wear, or the hose is cut, the hose and regulator must be replaced. Prior to operation.
WARNING
This Member’s Mark Griddle is sold propane ready, and is not convertible to natural gas. Any attempt to convert this
griddle to natural gas will void the manufacturers warranty.
OFF
MAX
MIN
Summary of Contents for G70302
