Member's Mark G70302, Assembly Instructions & User Manual

Page: 17 / 40

1-833-454-0864
1 7
Burners & Firebox Maintenance
Although your griddle’s firebox is fully protected from grease and other build-up that can accumulate during cooking,
regular checks of the burners and ignition electrode are still required to ensure proper performance, safety and a
longevity of your parts.
Burners
Because the burners are covered by the griddle top, it is not as easy to identify poor performance and premature aging
of parts.
For this reason, we recommend that once a season the griddle top is removed and burner maintenance conducted.
1. Remove griddle top. Place on the ground, right side up.
2.
Remove hitch pins/screws to free the burners.Use WD40 and
a screwdriver/pliers to make this removal easier.
3. Remove burners
4.
Use a flexible venturi brush to clean the interior of the burners.
Ensure you enter the burner far enough to remove any spider
webs and nests that may be present.
5.
Use a wire or paper clip to clean any blocked burner ports.
6. Brush away any rust or corrosion from the burners surface,
and wipe clean with a damp cloth. Dry the burners.
7. Re-install the burners. Ensure that the burners are properly seated on the valve gas jet before assembling
hardware.
CARE AND MAINTENANCE
NOTE
Before reinstalling burners, use a cotton swab to clean the valve gas jet.