31 of 39 20141119-Ver1
LIGHTING THE BACK BURNER
1. Read instructions before lighting;
2. Open lid before lighting burner.
3. Make sure all control knobs are in the "
OFF
" position.
4. Turn ON gas valve from source or tank.
5. Push and turn back burner control knob to "
HI
", Keep pushing the control knob and
immediately press and hold the electronic ignition button.
6. When burner is lit, still HOLD the control knob for 20 seconds and then release.
7. If ignition does NOT occur in 5 seconds, turn the burner control knob off, wait 5 minutes to
allow gas to dissipate. Repeat the lighting procedure.
8. To turn burners off, turn the control knobs clockwise until they lock in the
OFF
position.
