background image

                                          39 of 39                                  20141119-Ver1 

LIMITED WARRANTY 

 

1. 

Manufacturer warrants this Product to be free from defects in workmanship and materials 
for a period of Ninety (90) days from the date of purchase, PROVIDED claims are submitted, 
in writing, with proof of purchase.     

2. 

If any part of this item fails because of a manufacturing defect within the Limited Warranty 
Period, Manufacturer offers to replace such part(s) provide that such parts have not been 
improperly repaired, altered, or tampered with or subject to misuse, abuse or exposed to 
corrosive conditions. This Limited Warranty is, however, subject to certain limitations, 
exclusions, time limits and exceptions (Hereinafter “Conditions”) as listed below.  Read 
these Conditions carefully. 

3. 

This Limited Warranty shall be limited to the replacement or repair of any part(s) which 
Manufacturer determines, after reasonable examination, to have been defective at the time 
of manufacturing and manufacturer’s obligation(s) shall be limited to replacement, if any, of 
defective part(s) which shall be shipped at Original Purchaser’s expense to Original 
Purchaser’s designated shipping address. 

4. 

This Limited Warranty is given to and covers the 

ORIGINAL PURCHASER ONLY 

and such 

coverage terminates Ninety (90) days from the date of purchase.

 

5. 

DAMAGE LIMITATION WARNING:   

IN NO EVENT SHALL MANUFACTURER BE 

LIABLE FOR ANY INCIDENTIAL OR CONSEQUENTIAL DAMAGES, INCLUDING (BUT 
NOT LIMITED TO) LOSS OF USE OF THE PRODUCT, LOSS OF TIME, LOSS OF FOOD, 
INCONVENIENCE, EXPENSES FOR TRAVEL, TRANSPORTATION LODGING 
EXPENSES, LOSS BY DAMAGE TO PERSONAL PROPERTY OR LOSS OF INCOME, 
PROFITS OR REVENUE. 

6. 

MANUFACTURER’S OBLIGATION:

  Manufacturer’s liability shall be limited to the 

delivery of a good, merchantable Product and, if necessary, the repair or replacement, at 
manufacturer’s option, of any defective part or unit. 

7. 

TRANSFER LIMITATIONS:

  This Limited Warranty is not  assignable or transferable.    It 

covers only the original purchaser. 

8. 

RESERVED RIGHT TO CHANGE:

  Manufacturer reserves the right to make changes or 

improvements to products it produces in the future without imposing on itself any obligations 
to install the same improvements in the products it has previously manufactured. 

9. 

This Limited Warranty gives the Original Purchaser specific legal rights but there may be 
other rights which vary by jurisdiction. 

10. 

This warranty does not cover the following items:

 

  Chips or scratches on porcelain or painted surfaces. 

  Rust or corrosion is not deemed a manufacturing or materials defect. 

  Discoloration or loss of paint due to handling during assembly, heat or cleaning 

products.   Paint may require touch up. 

  Stainless steel discoloration or corrosion. 

  Consumables such as batteries. 

 

IF CUSTOMER SERVICE BECOME NECESSARY:

 

1. 

The Original Purchaser is responsible for shipping and handling charges of the returned 
item(s) and replacement parts, if any. 

2. 

All parts to be replaced will need to be shipped before replacement items will be sent. 

3. 

Follow the Customer Service Representative’s instructions exactly.  If a return is 
necessary, it must be packed carefully and shipped prepaid. 

 

Should you encounter any problem, 

CALL US FIRST. 

Do not return product to the store. 

WE CAN HELP. 

 

For assistance, contact customer service at 

[email protected]

 

or at (888) 837-1380, Mon to Fri, 8:00am – 5:00pm Pacific Standard time 

 

Manufacturer information 

Rankam Metal Products Manufactory Ltd. 

Address: 18/F,. New Lee Wah Centre, 88 Tokwawan Road, Kowloon, Hong Kong.

 

Summary of Contents for GR2150901-MM-00








































Reviews: