Makes
laundry
easier!
MSI-3001
Steam iron
Plancha de vapor
Fer à repasser vapeur
Ferro a vapor
DampfbFerro da stiro a vapore
ügeleisen
English
Steam iron
MSI-3001
Dear customer,
Many thanks for choosing to purchase a
Mellerware
brand product.
Thanks to its technology, design and operation
and the fact that it exceeds the strictest quality
standards, a fully satisfactory use and long product
life can be assured.
SAFETY ADVICE AND WAR-
NINGS
- The appliance should be used
and placed on a flat and stable
surface.
- When the appliance is placed on
its support, make sure that the
surface on which it is placed is
stable.
- Do not leave the appliance unat-
tended while it is connected to the
mains supply.
- This appliance can be used by
people unused to its handling,
disabled people if they have been
given supervision or instruction
concerning use of the appliance in
a safe way and understand the
hazards involved.
- Cleaning and user maintenance
must not be done by children
unless supervised.
- Keep the appliance and its cable
out of reach of children under the
age of eight.
- This appliance is not a toy. Chil-
dren should be supervised
to ensure that they do not play
with the appliance.
- Do not use the appliance if it has
been dropped, if there are visible
signs of damage or if it has a leak.
- The temperature of the accessi-
ble surfaces may be high when
the appliance is in use.
- If the mains connection is dama-
ged, it must be replaced. Take the
appliance to an authorised Tech-
nical Assistance Service In order
to prevent any danger, do not
attempt to dismantle or repair it
yourself.
- This appliance is for household
use only, not professional or
industrial use.
-
This symbol indicates that
the surface may heat up
during use.
- To avoid occurrences with the power grid, it is
advisable that the device be connected to a
maximum impedance of 0.27Ω. If in doubt,
please consult your utility company.
--Unplug the appliance from the mains before
refilling the water tank.
--Ensure that the voltage indicated on the namepla-
te matches the mains voltage before plugging in the
appliance.
--Connect the appliance to a 16 amp earthed mains
socket.
--The appliance’s plug must ft into the mains socket
properly. Do not modify the plug. Do not use plug
adaptors.
--Do not use or store the appliance outdoors.
--Do not leave the appliance out in the rain or
exposed to moisture. If water gets into the applian-
ce, this will increase the risk of electric shock.
--Do not stretch the mains cable. Never use the
mains cable to lift, carry or unplug the appliance.
--Do not wrap the cable around the appliance.
--Ensure that the electric cable does not ge trapped
or tangled.
--Do not allow the connection cable to hang freely or
to come into contact with the appliance’s hot
surfaces.
--Check the condition of the mains cable. Damaged
or twisted cables increase the risk of electric shock.
--Do not touch the plug with wet hands.
--Do not use the appliance if the cable or plug is
damaged.
--If any of the appliance casings breaks, immediate-
ly disconnect the appliance from the mains to
prevent the possibility of an electric shock.
--Do not touch any heated parts, as this may cause
serious burns.
Use and care:
- Fully unroll the appliance’s power cable before
each use.
- Do not use the appliance if the accessories
attached to it are defective. Replace them immedia-
tely.
- Do not use the appliance if the on/off switch does
not work.
- Use the appliance handle/s, to lift or move it.
- Do not use the appliance at an angle or turn it
over.
- Do not turn the appliance over while it is in use or
connected to the mains.
- To keep the non-stick coating in good condition,
do not use metal or pointed utensils on it.
- Respect the MAX level indicator. (Fig.1)
- Unplug the appliance from the mains when not in
use and before undertaking any cleaning task.
- This appliance is for household use only, not
professional or industrial use.
- Store this appliance out of reach of children and/or
those with reduced physical, sensorial or mental
abilities or who are unfamiliar with its use
- Do not store or transport the appliance if it is still
hot.
- If the iron is left in its housing at maximum tempe-
rature for prolonged periods, this may cause
discolouration, which will not affect appliance
operation in any way.
- To ensure that the iron functions correctly, keep
the soleplate scratch free and do not use it on metal
objects (e.g. the ironing board, buttons, zips…)
- The use of distilled water is recommended,
especially if the water in your area contains any
type of silt or is “hard” (contains calcium or magne-
sium).
- Check that the lid is closed properly before
switching the appliance on.
- Never leave the appliance connected and unatten-
ded if is not in use. This saves energy and prolongs
the life of the appliance.
- Never rest the appliance on a surface while in use.
- Do not use the appliance on any part of the body
of a person or animal.
- Do not use the appliance on pets or animals.
- Do not use the appliance to dry garments of any
kind.
- Turning the thermostat control to the minimum
(MIN) setting does not guarantee that the iron is
switched off completely.
SERVICE:
- Make sure that the appliance is serviced only by
specialist personnel, and that only original spare
parts or accessories are used to replace existing
parts/accessories.
- Misuse or failure to follow the instructions may be
dangerous and renders the manufacturer’s guaran-
tee null and void..
DESCRIPTION
A Spray button
B Steam blast button
C Steam flow control
D Auto-cleaning button
E Temperature regulator
F Pilot light
G Filling spout
H Spray nozzle
I Soleplate
Read these instructions carefully before switching
the appliance and keep them for future reference.
Failure to follow and observe these instructions may
result in an accident.
INSTRUCTIONS FOR USE
BEFORE USE:
- Peel off appliance’s protective film.
- Make sure that all the product’s packaging has
been removed.
- Some parts of the appliance have been lightly
greased, consequently, the appliance may give off
a light smoke the first time it is used. After a short
time, this smoke will disappear.
- Prepare the appliance according to the function
you wish to use:
FILLING WITH WATER:
- It is essential to have filled the tank with water to
be able to work with steam.
- Open the lid on the filling spout.
- Fill the tank, taking care to respect the MAX level
(Fig. 1)
- Close the filling spout lid.
USE:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- Turn the thermostat control to the desired tempe-
rature position.
- Do not use temperatures higher than those indica-
ted on the garments to be ironed.
● Temperature for synthetic fibres (Polyester,
Nylon…).
●● Temperature for silk, wool. (Minimum
temperature for ironing with steam)
●●● Temperature for cotton.
Max Temperature for linen.
- If garment has various kinds of fibres, select the
temperature for the fibre that requires the lowest
temperature. (For example, select the temperature
for polyester for a fabric made out of 60% polyester
and 40% cotton).
- Wait until the pilot light (F) has gone out, indicating
that the appliance has reached an adequate
temperature.
- During use the pilot light (F) will automatically flash
on and off, indicating that the heating elements are
operating in order to maintain the desired tempera-
ture.
DRY IRONING:
- The appliance has a steam flow regulator which,
when set to 1, allows dry ironing (without steam).
STEAM IRONING:
- It is possible to iron with steam whenever the tank
has water and the adequate temperature is
selected.
STEAM FLOW CONTROL:
- The appliance has a (C) control knob for adjusting
the steam flow.
SPRAY:
- The spray can be used in both steam and dry
ironing.
- Press the spray button ( A ) to use this operation.
- The spray button has to be pressed repeatedly to
release the first spray.
STEAM BLAST:
- This function provides extra steam for removing
creases.
- Press the steam blast button ( B ). Wait a few
seconds until the steam penetrates the fibres of the
garment before pushing the button again. For
optimum steam quality, do not apply more than
three successive blasts.
- The spray button has to be pressed repeatedly to
release the first spray.
VERTICAL IRONING:
- It is possible to iron hanging curtains, items of
clothing on their own hanger, etc. To do so, follow
these instructions:
- Select the iron’s maximum temperature by turning
the iron’s temperature regulator clockwise. (Fig 2)
- Iron from top to bottom while pressing the steam
control ( B ). Important: for cotton and linen, it is
recommended to put the base of the iron in contact
with the material. For other more delicate fabrics, it
is recommended to keep the base of the iron a few
centimetres away.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Select the minimum position (MIN) using the
thermostat control.
- Unplug the appliance from the mains.
- Remove the water from the water tank.
- Clean the appliance.
CLEANING
- Unplug the appliance from the mains and let it cool
down before performing any cleaning task.
- Clean the appliance using a damp cloth with a few
drops of detergent and then dry it.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products, for
cleaning the appliance.
- Do not immerse the appliance in water or any
other liquid, or place it under a running tap.
SELF-CLEANING FUNCTION:
- It is important to self-clean the appliance at least
once a month to remove calcium and any other
built-up minerals inside the iron.
- Fill the water tank to its maximum level, as indica-
ted in the “filling with water” section.
- Place the iron in an upright position, plug in to the
mains and select maximum temperature.
- Leave the appliance to heat up until the pilot light
indicates that it has reached its consigned tempera-
ture.
- Unplug the appliance and place it in the sink.
- Press and hold the self-clean button.
- Let the water flow out through the steam vents in
the base, while lightly shaking the appliance.
- Release the button after a minute or when the tank
becomes empty.
- Leave the iron in the upright position until it has
cooled.
* HOW TO DEAL WITH LIME SCALE INCRUSTA-
TIONS:
- For the appliance to work correctly it should be
kept free of lime scale or magnesium incrustations
caused by the use of hard water.
- To prevent this kind of problem, we recommend
the use of water with low lime or magnesium
mineralisation.
- Homemade solutions are not recommended for
de-scaling this appliance, such as the use of
vinegar.
FAULTS AND REPAIR
- Take the appliance to an authorised technical
support service if problems arise. Do not try to
dismantle or repair it, as this may be dangerous.
- If the mains cable has been damaged, it must be
replaced, proceed as in the case of a fault.
FOR EU PRODUCT VERSIONS AND/OR IN
THE CASE THAT IT IS REQUESTED IN YOUR
COUNTRY:
ECOLOGY AND RECYCLABILITY OF THE
PRODUCT
- The packaging materials for this appliance are
included in a collection, classification and recycling
system. Should you wish to dispose of them, use
the appropriate public containers for each type of
material.
- The product does not contain concentrations of
substances that could be considered harmful to the
environment.
This symbol means that if you wish to
dispose of the product once its useful life
has ended, it must be deposited with an
authorised waste management agent for
the selective collection of Waste Electrical and
Electronic Equipment (WEEE)
This appliance complies with Directive 2014/35/ EC
on Low Voltage, with Directive 2014/30/EU on
Electromagnetic Compatibility, with Directive
2011/65/EU on restrictions on the use of certain
dangerous substances in electrical and electronic
appliances and with Directive 2009/125/EC on the
ecological design requirements applicable to
products related to energy.
C
M
Y
CM
MY
CY
CMY
K
MANUAL STEAM IRON MSI-3001 CRUCES.pdf 1 3/9/18 8:44