ConnectX EN Dual Port Ethernet Network Interface Cards With PCI Express x8 User’s Manual
33
Rev 0.30
Mellanox Technologies
C.3 Assembling a New Bracket
The bracket can now be assembled onto the Adapter card. See Figure 15.
Gently place the bracket onto the card fitting the connectors through the bracket connector holes. Make sure the
LEDs are aligned into their intended bracket holes.
Insert a screw along with a washer into each of the two holes on the card intended for holding the bracket.
Figure 15:
Adapter
Card Ready for New Bracket
Figure 16: Place Bracket onto Card
LED Holes
