30
Rev 0.30
Mellanox Technologies
3. Repeat the above actions for the second connector’s clip.
4. Unscrew both screws from the card using a torque screwdriver as shown in Figure 10.
5. Grip the bracket as shown in Figure 11, placing your thumb on the LED component.
6. In a rotating move toward the component side of the card, slide the bracket out of the connectors (Figure 11 (c)).
7. Gently hold your thumb on the LED component.
8. At the same time extract the bracket as shown in Figure 11 c, (Make sure to protect the LED while extracting the
bracket).
Figure 9: Extracting Connector Clip
(a) Gently Push One Hook of Clip
(b) Gently Push Other Hook of Clip
(c) Pull Clip Away
Figure 10: Unscrew Bracket Screws
