12
Rev 0.30
Mellanox Technologies
2.2 Installation Instructions
2.2.1
Installation Safety Warnings
1.
Installation Instructions
2.
Over-temperature
3.
During Lightning - Electrical Hazard
4.
Copper InfiniBand Cable Connecting/Disconnecting
5.
Equipment Installation
6.
Equipment Disposal
7.
Local and National Electrical Codes
Read all installation instructions before connecting the equipment to the power source.
This equipment should not be operated in an area with an ambient temperature exceed-
ing the maximum recommended:55°C (131°F). Moreover, to guarantee proper air flow,
allow at least 8cm (3 inches) of clearance around the ventilation openings.
During periods of lightning activity, do not work on the equipment or connect or discon-
nect cables.
Copper InfiniBand cables are heavy and not flexible, as such they should be carefully
attached to or detached from the connectors. Refer to the cable manufacturer for special
warnings and instructions.
This equipment should be installed, replaced, or serviced only by trained and qualified
personnel.
Disposal of this equipment should be in accordance to all national laws and regulations.
This equipment should be installed in compliance with local and national electrical
codes.
