15
Use
To use the product normally, it is sufficient to switch the headphones on and off exclusively by using button “
A
” (press
for 3 seconds to switch on, press for 5 seconds to switch off)
When the headphones are not in use, it is advisable to switch them off, to avoid completely draining the battery, then
place them correctly on the charging dock (see the paragraph “Charging the batteries”), so that the battery will be
charged the next time you use them.
In the absence of an incoming audio signal, the charging dock automatically switches off after around 5 minutes (the
green indicator light "I" goes out).
If the headphones will not be used for a long period of time, it is advisable to unplug the AC adapter from the wall outlet
and recharge it every 4-6 months to prevent trickle discharge.
Recharging the battery
Position the headphones (receiver) on the recharge contacts of the charging dock (transmitter) to recharge the internal
battery;
Note:
the headphones may be placed on the charging dock facing in any direction.
The red “I” (POWER/CHARGE) LED light will come on to confirm that the headphones are correctly positioned on the
charging dock; the light will turn green when the headphones are fully charged.
The initial charge will take at least 4-5 hours.
It is possible to charge the headset also through its own micro-usb socket "
F
", during the recharge the led "
E
" will be on
in red, when the recharge is finished it will turn off.
Notes
Technical Specifications
Transmission mode
Digital Hopping System
Frequency Range:
2400MHz – 2483.5MHz
RF output Power
< 10 mW e.r.p.
Transmitter power supply
DC 5V – 1A
Frequency response
20Hz – 20KHz
Distortion
0.5%
Signal/noise ratio
90dB
Maximum transmission distance
30 metres (in free field)
Headphone charging time
about 1.5-2 hours
Integrated lithium battery
3,7V – 400mAh
Operating time of the headphones
about 8 hours with a fully charged battery, at medium
volume
Operating temperature
0°C-40°C
Transmission delay (latency)
about 15ms
