![background image](http://html1.mh-extra.com/html/melec/db-2310-b32/db-2310-b32_instruction-manual_1767051029.webp)
Instructions Manual
10.Specifications
10-1.General Specifications
DC+24V
*1 (Ripple voltage P-P 2.0V or less)
● Rated input current :
〔DRIVE I.SEL ⇒ IH set up〕
at DRIVE
DC+24V: 0.8A
*2
● Rated input current :
〔HOLD I.ADJ ⇒ Approx. 40% set up〕
at HOLD
DC+24V: 0.3A
●DRIVE CURRENT
0.1~0.4A/phase
●HOLD CURRENT
Approx. 40% of DRIVE CURRENT
(factory-set)
●Drive pulse input
(CW, CCW)
Photo-coupler input
●Motor excitation stop input
(M.F)
Photo-coupler input
●PULSE INPUT TYPE selection
(SPI SEL)
●HOLD switching time selection
(DHT SEL)
●Step angle selection
(STEP SEL)
●HOLD CURRENT adjustment
(HOLD I.ADJ)
●DRIVE CURRENT selection
(DRIVE I.SEL)
Indoor (Exposure to direct sun is not allowed.)
Without any explosive, corrosive or inflammable gas,
oil mist, or dust.
*1
Input voltage range is DC+24V±10%.
*2
Use a power supply that provides sufficient input current.
Supply Power
Driving method
Motor output
current
Bipolar constant current type
Input Signal
●Overheat alarm LED (O.H.A LED)
Operating Ambient
Temperature
0℃ ~ +40℃
(No freezing allowed.)
Functions of
Operating Sections
Overheat alarm
(No condensation allowed.)
Storing Temperature -10℃ ~ +55℃
(No freezing allowed.)
Operating Ambient
Humidity
80%RH or less
Weight
30g
Insulation resistance
DC connector - signal connector
DC500V 100MΩ or more
Exterior Dimensions
H
50 ×
W
65 ×
D
16.1 (mm)
Storing Humidity
80%RH or less
(No condensation allowed.)
Atmosphere
-29-