![background image](http://html1.mh-extra.com/html/melec/db-2310-b32/db-2310-b32_instruction-manual_1767051019.webp)
Instructions Manual
5.Installation
5-1.Conditions for Installation
Mount it on a noncombustible member.
Keep it away from combustibles.
Overheating may cause fire.
(1) Designed for incorporating into equipment used indoors, this product requires
to be installed in the following environment:
● Area that is free of explosive, corrosive or inflammable gas
● Indoors (Area not exposed to direct sunshine)
● Area that ambient temperature and humidity are controlled within the range
set out in the specifications
● Area protected from dust, salt or iron particles
● Area not subject to direct vibration or shock
● Area not subject to splashing water, oil or chemicals
(2) Install the driver at least 15mm away from other equipment.
(3) Considering heat release, control the ambient temperature around the driver
within the specified value.
● Take measures against accumulation of heat such as allowing generous space
around the driver or installing a fan so that heat release is taken care of.
(4) In the case that an overheat alarm(O.H.A) LED comes on, perform the cooling measure
of the compulsion air cooling etc.
Use the driver on the condition that an overheat alarm(O.H.A) LED goes out.
(5) Do not allow standing or placing anything heavy on the product.
15mm or more
15mm or more
15mm or more
DB-2310
DB-2310
15mm or more
I
-19-