OPERATING INSTRUCTIONS
To start using the heater, follow these instructions:
1. Check the panel and make sure it is not damaged.
2. Connect the power and then turn on the illuminated ON / OFF switch (A).
When using for the first time, it is recommended to operate the appliance for 15 or 20 minutes in an airy environment, in
order to eliminate possible odors (paint or other).
3. Adjust the temperature of the digital display to the desired comfort setting. The heater switches off automatically once
the set comfort level has been reached and switches on again when the comfort level falls below the set level. Note: the
comfort level number does not necessarily represent the Celsius room temperature.
4. If you want to leave it inactive for a long time, unplug it from the power outlet.
CONTROL PANEL
- Button
: press this button to activate the appliance and / or put it in stand-by
-
SET key: activates and sets the room temperature adjustment (min = 0 ° C, max = 37 ° C), time (hour, minutes, day).
-
▲ button increases the value (temperature, time) or the period (days) during function adjustment, and activates the open
window detector.
-
▼ button decreases the value (temperature, time) or the period (days) during the adjustment of the functions, and
deactivates the open window detector.
-
M
button selects normal or weekly use mode.
The device can be used with the following methods and functions:
Normal mode:
the appliance switches on and off manually, and in this it requires setting the room temperature.
Operate as follows:
-Insert the plug into the socket.
-Adjust switch 0 / I to pos. I
-Press the button
to turn on the appliance.
-
Press the SET button and then ▲ or ▼ to increase or decrease the room temperature whose value is shown on the
display, which is flashing during the adjustment. Press SET again to confirm the temperature, the display of which becomes
stable. If the set value is greater than the room temperature, the appliance switches on and when the set value is reached,
it switches off, and then switches on again when the temperature drops again.
- To deactivate the operation, press the button
: the appliance goes into standby. To turn it off completely, turn the 0 /
I switch to pos. 0
Weekly programming mode:
the appliance is automatically activated and deactivated according to the programming set
for a single period for each day of the week. The days are shown on the display as follows: MO = Monday. TU = Tuesday.
WE = Wednesday. TH = Thursday. FR = Friday. SA = Saturday. SU = Sunday.
Operate as follows:
-Insert the plug into the power press.
-Adjust switch 0 / I to pos. I.
-Press the button
to turn on the appliance.
-
Set the local time (Hour / Minute / Day): press SET for about 3 seconds (you will hear a "beep" and the display will show
), the Hour will flash.
Press ▲ or ▼ to increase or decrease and then SET to confirm, and at the same time set the
minutes that flash and press ▲ or ▼ to increase or decrease and then SET to confirm, and simultaneously set the day
following each press of ▲ or ▼, and then SET to confirm.
-Press M to set the weekly programming (it is activated only if the local time has been set), and press again to select the
day to be set, press SET to adjust the temperatu
re (whose value flashes) and ▲ or ▼ to increase or decrease . Press SET
to confirm, at the same time "ON" flashes and the switch-
on time which is adjusted using ▲ or ▼ to increase or decrease.
Press SET to confirm and simultaneously to adjust the Minutes u
sing ▲ or ▼. Press SET to confirm, and at the same time
"OFF" flashes and the switch-
off time is adjusted using ▲ or ▼ to increase or decrease. Press SET to confirm and
simultaneously to adjust the minutes using ▲ or ▼, press SET to confirm. The same values are used to set the temperature
and operating values for each of the other days of the week.
To deactivate the weekly programming, press the
M
key until the symbol
goes out.
Open window detector function
: when the appliance is in operation, if the temperature drops a few degrees with respect
to the set value and in a short time, this function interrupts the appliance operation and puts it in stand-by. The temperature
sensor must be correctly positioned, i.e. fully protruding.
