10 Settings
49
Connection via TCP
ü
A suitable documentation software e.g. MELAtrace is installed.
1.
Select
Connection via TCP
. The TCP port
currently set is displayed on the lower pushbutton
(Standard TCP port: 65001).
2.
Press on the lower pushbutton to change the pre-set
TCP port. The display switches to the settings
window.
3.
Delete the most up-to-date TCP port using key C;
enter another TCP port.
4.
Confirm with SAVE.
IP addresses
PLEASE NOTE
The setting up of the (practice) network will require in-depth understanding of the
network technology.
Errors in the handling of IP addresses can result in malfunctions and data loss in your
practice network.
n
IP addresses may only be set by the (practice) network system administrator.
The device is equipped as standard with IP addresses which all belong to a common network with the sub-
net mask stated in the following depiction.
Device
IP address
Remarks
Steam sterilizer
192.168.40.40
Preset works side
Computer
192.168.40.140
Preset works side
MELAprint 42/44 log printer
192.168.40.240
Preset works side
MELAprint 60 label printer
192.168.40.160
Preset works side
Gateway
192.168.40.244
Not relevant within a network
Subnet mask
255.255.255.0
Possibly to be adopted by customer
network
