4 Description of the device
15
Operating pressure of the device
Electrical connection of the device: AC current
Read this user manual carefully before commissioning the device.
In affixing this CE mark, the manufacturer declares that this medical product fulfils the
basic requirements of the Medical Device Directive. The four-digit number confirms that
this is monitored by an approved certification agency.
In affixing this CE mark, the manufacturer declares that this product fulfils the basic
requirements of the Pressure Equipment Directive. The four-digit number confirms that
this is monitored by an approved certification agency.
The device may not be disposed as domestic waste. The vendor is responsible for
appropriate disposal of the device - it must be delivered to the vendor to be disposed of.
MELAG devices are synonymous for long-term quality. When you eventually need to
decommission your MELAG device, we offer a special disposal service. Simply contact
your stockist.
Symbols on the power switch
Switching on device
Switching off device
Load mounts
Detailed information regarding the various mounts, their combinability with various load holders and their
application can be found in the document "User Manual Accessories for small steam sterilizers".
A spring clip is located on the rear panel of the sterilization chamber to fix the mount. When using a “Plus”
mount, slide the mount into the sterilization chamber to its fullest extent, until the mount snaps into the
spring clip.
