7 Sterilization
28
Additional programs
Use/function
Vacuum test
For measuring the leakage rate, test with a dry and cold device (test
without load)
Bowie & Dick test
Steam penetration test with special test package (available from
specialist stockists)
Conductivity meas.
For manual measurement of the feed water quality
Drain
For draining and pressure release of the double jacket steam generator,
e.g. for service, maintenance or before transport
Additional program options
Additional drying
Used with the types of load specified in this chapter, the program-specific drying times guarantee very
good drying of the sterile material. For difficult drying tasks you can activate the additional drying function
retrospectively during a running program, see
[
Start time pre-selection
NOTICE
Unsupervised operation of electrical devices, including this steam sterilizer at the
operator’s risk. MELAG accepts no liability what so ever for any damage resulting from
unsupervised operation.
This function enables you to select any program and start it at a time of your choice. The start time pre-se-
lection is only active for the unique time and program selection. That means that after completion of the
program, the pre-selected start time expires. You can switch off the steam sterilizer during the start time
pre-selection. However, the steam sterilizer must be switched on before the timer runs out.
Please note, the security query means that this function is not possible for Quick-Program S. To set a pro-
gram start to a particular number, proceed as follows:
1.
After selecting the program, press the
symbol in the action bar. The display switches to the
settings window.
