Meissner mts2000/02, Manual

Page: 10 / 54

3
m
eißner gate systems 3 - 2 Gate control operating manual mts2000/02
Basic information
3.5 Improper use
Incorrect or improper use of the device can put the life and limb of the user at risk,
inflict injury on the user and damage the device and/or other material assets.
Liability exclusion: The manufacturer assumes no liability for damage caused by
improper use.
3.6 Instructions concerning EMC protection
The controller has been manufactured and tested in accordance with the
corresponding guidelines for EMC (see Section 1.2 CE marking). However, it is
possible that mains voltage peaks (due to non-EMC compatible loads, for example)
may cause the processor to switch off.
This procedure is intentional and in no way affects the controller’s safety functions.
The processor restarts automatically thereafter and the controller is set to “Ready”
mode. The programme sequence can be restarted via the emission of a pulse.
These voltage peaks can be suppressed on-site (e.g. by inserting a mains filter as
close as possible to terminals 43 and 44, or by taking similar measures).