12.5 Conguration: Security
Page 61
12.5.1 Password
On the Security page you can manage all security relevant parameters for your timeserver. In the rst section
Login the administration password can be changed, which is used for SSH, TELNET, FTP, HTTP and HTTPS
access. The password is stored encrypted on the internal ash disk and can only be reset to the default value
timeserver by a factory reset, changing all settings back to the factory defaults. Please refer to the LCD
conguration section in this manual.
12.5.2 HTTP Access Control
With this function you can restrict the access to the web interface and allow only a few hosts to login. Only the
hosts you entered in the list are able to login to the HTTP/HTTPS server of your LANTIME.
If a non-allowed host tries to login, the following message appears:
12.5.3 SSH Secure Shell Login
The SSH provides you with a secure shell access to your timeserver. The connection is encrypted, so no readable
passwords are transmitted over your network. The actual LANTIME version supports SSH1 and SSH2 over IPv4
and IPv6. In order to use this feature, you have to enable the SSHD subsystem and a security key has to be
generated on the timeserver by using the Generate SSH key button. Afterwards, a SSH client can connect to
the timeserver and opens a secure shell:
ssh root @ 192.168.16.111
The rst time you connect to a SSH server with an unknown certicate, you have to accept the certicate,
afterwards you are prompted for your password (which is congured in the rst section of this page).
Default Password: timeserver
If you generate a new SSH key, you can copy and paste it into your SSH client conguration afterwards in
LANTIME M600 MRS
Date: 31st July 2014
61
