manualshive.com logo in svg

Meinberg LANTIME M600 MRS, User Manual

Share
Download
Meinberg LANTIME M600 MRS User Manual Download Page 155

15.14 Third party software

Page 149

15.14.5 GNU General Public License (GPL)

Version 2, June 1991 - Copyright (C) 1989, 1991

Free Software Foundation, Inc.

675 Mass Ave, Cambridge, MA 02139, USA

Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not

allowed.

Preamble

The licenses for most software are designed to take away your freedom to share and change it. By contrast,

the GNU General Public License is intended to guarantee your freedom to share and change free softwareto

make sure the software is free for all its users. This General Public License applies to most of the Free Software

Foundation's software and to any other program whose authors commit to using it. (Some other Free Software

Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your

programs, too.

When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are de-

signed to make sure that you have the freedom to distribute copies of free software (and charge for this service

if you wish), that you receive source code or can get it if you want it, that you can change the software or use

pieces of it in new free programs; and that you know you can do these things.

To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask

you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies

of the software, or if you modify it.

For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the re-

cipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And

you must show them these terms so they know their rights.

We protect your rights with two steps: (1) copyright the software, and (2) oer you this license which gives

you legal permission to copy, distribute and/or modify the software.

Also, for each author's protection and ours, we want to make certain that everyone understands that there

is no warranty for this free software. If the software is modied by someone else and passed on, we want its

recipients to know that what they have is not the original, so that any problems introduced by others will not

reect on the original authors' reputations.

Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that

redistributors of a free program will individually obtain patent licenses, in eect making the program proprietary.

To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all.

The precise terms and conditions for copying, distribution and modication follow.

GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING,

DISTRIBUTION AND MODIFICATION

0. This License applies to any program or other work which contains a notice placed by the copyright holder

saying it may be distributed under the terms of this General Public License. The "Program", below, refers to

any such program or work, and a "work based on the Program" means either the Program or any derivative work

under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with

modications and/or translated into another language. (Hereinafter, translation is included without limitation in

the term "modication".) Each licensee is addressed as "you".

Activities other than copying, distribution and modication are not covered by this License; they are outside

its scope. The act of running the Program is not restricted, and the output from the Program is covered only if

its contents constitute a work based on the Program (independent of having been made by running the Program).

Whether that is true depends on what the Program does.

1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium,

LANTIME M600 MRS

Date: 31st July 2014

149

Summary of Contents for LANTIME M600 MRS

































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands