9617722
38 / 60
Malfunction
Possible cause
Note/remedy
Incomplete
cleaning cycle
Programme interrup-
tion by operator
• Run complete cleaning cycle.
• In the event of an appliance
malfunction, safe access to the
load in the appliance is only
possible for authorised persons
(e.g. service technicians).
Care utensils
not clean after
programme
run
Care utensils unsuit-
able or incorrectly
used
Wrong programme
selected
Residues are too
firmly dried
• Check position/suitability of the
care utensil
• Correct programme selection
and start again
• The care utensils must be sub-
jected to alternative cleaning.
The responsibility for suitable
cleaning lies with the operator.
MEIKO recommends that the
care utensils be subjected to
basic manual cleaning and sub-
sequent disinfection using ap-
propriate protective equipment.
