Operating instructions FV 28 GiO
Datei:1D3A4F9D.doc
9671086
29/38
W e reserv e the right to change ex ecution and construction!
MEIKO Maschinenbau GmbH & Co. KG, Englerstr. 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
Par.
No.
Configuration
options
Use as
value
range
Unit
Factory
setting
Note
202
Must be-tank
temperature
Parameters
10 ...82
°C
60
Standard for all the rinse programs
on one appliance! Output depend-
ent on definition.
203
Pre-rinse time
Parameters
0 ...8
sec.
0
See pre-rinse process step
204
Post-rinse time
Parameters
4.0 ...25.0
sec.
8.0
Duration of final rinse time, running
time limited by P306!!
205
Operation indica-
tor
Parameters
0 ...10
-
1
Definition of the information which
is to be switched via the poten-
tial-free contact
0 - No information
1 - Filling/Heating, ready for wash-
ing/washing or draining
2 - Filling/Heating, ready for wash-
ing/washing
3 - Filling / Heating
4 - ready for washing
5 - Washing
6 - Draining
7 - Error
8 - Not status machine OFF and
draining
9 - EW active
10 -
ᅠ
Not status Machine OFF
218
Shortage of rinse
aid
Parameters
0/1
-
0
Monitoring
Indication
219
Shortage of de-
tergent
Parameters
0/1
-
0
Monitoring
Indication
224
Power supply
mode
Parameter
0 ...3
-
1
Definition: Energizing rinse aid
pump:
0 - No signal
1 - Energizing according to calcu-
lated running time
2 - Energizing as final rinse
3 - Energize as wash pump
225
Power supply
mode
detergent dosing
pump
Parameters
0 ...4
-
1
Definition: Energizing detergent
pump:
0 - No signal
1 - Energizing according to calcu-
lated running time
2 - Energizing as final rinse
3 - Energize as wash pump
4 - Option
– detergent pump using
negative pressure dosing ADT
240
Detergent pump
activation mode
Parameters
0/1
-
0
Effective only upon power supply
reset ON/OFF
ATTENTION!
All changes to ser-
vice parameters will be reversed.
Power supply reset must be car-
ried out within 5 minutes, otherwise
factory settings will not be loaded.
Without power supply reset, the
information 123 will be displayed.
