2.5 Bulb Alignment – TC Models
After the bulb has burned in, the system is ready for arc lamp alignment.
There are many methods to accomplish arc lamp alignment if one were to go
look on the internet. The following is only one of many methods.
1)
If the arc lamp is not already burning, turn on the power supply and let the
arc lamp “settle” for at least 5 minutes.
2)
On the stage of the TC, place a piece of plastic on the stage that
fluoresces with any of the filter sets installed as shown below. One may have to
find the appropriate color of plastic that fluoresces with the filter sets you have or
buy a set of fluorescing slides from Chroma Technology Inc or
