Disassembly of the product may result in electrical shock, injury or death,
equipment damage, loss of warranty coverage or may create other potential
hazardous consequences.
Always turn off the power switch and disconnect the cord from the power supply
when replacing fuses, connecting or disconnecting wiring, doing general
maintenance or replacing the DC arc lamp.
DO NOT OPERATE UNLESS THE UNIT IS PROPERLY GROUNDED!
Use only the specified power cord in a well grounded socket. Do not use in an
ungrounded power receptacle or in cases where there is a break in the ground
conductor or damage to the electrical wiring.
Only fuses of the specified type and rating are to be used as replacements.
Switch off the power and disconnect the power cord before replacing fuses. Use
of a non-compliant fuse may result in electrical shock or severe damage your
equipment.
The lamp and lamp house become extremely hot during and after operation. Do
not place any highly flammable or volatile material close to the lamp-house
during or after operation. Do not touch the lamp house or attempt to replace the
bulb for at least 30 minutes after the unit has been turned off or injury may result.
Do not obstruct the air vents on the lamp-house or power supply. The lamp
housing and power supply should must be located at least 10 cm (4 inches) away
from the nearest wall or any combustible objects.
Modifying the product in any way or unauthorized attempts to disassemble or use
the instrument for applications other then its intended design will automatically
void the warranty.
1.6 Warranty Notes
Meiji Techno warrants this product against defects in material and/or workmanship for
one year from the date of the original purchase to the original purchaser. Meiji Techno will
repair or replace, at its option, any product which under normal conditions of use and
service proves to be defective in material or workmanship. No charge will be made for
labor or materials with respect to defects covered by this warranty, provided all repair
work is done by Meiji Techno.
This warranty does not cover expenses incurred in the removal or reinstallation of any
instrument or instruments, whether or not proven defective. Replacement or repairs
