, MEI., 1996
29
CashFlow
®
520 changegiver Pocket Guide
Connect the looms and secure them
in their correct positions
1. Check that the looms cannot be trapped by the
unit or by the door of the machine.
2. Check that the unit’s lid opens fully when the
reject button is pressed, and that the reject lever
has 2mm - 3mm of clearance from the reject
mechanism of the machine
.
Adjust the clearance if
necessary.
3. Ensure that the unit’s coin entry cup is aligned
with the machine’s coin entry chute, and that the
coin exit chutes are lined up.
4. With the power off, insert ten of the largest and
smallest coins to check the coin routing to the coin
return cup.
Switch on the power to the unit
1. Check that the red LED comes on.
2. Use the keypad or the Route Alpha terminal to
set the vend prices.
NOTE: Use the keypad if the installation is an
electromechanical interface. If it is an electronic
serial interface, prices are normally held in the
vending machine.
Push open the top
cover flap to get
access to the fixing
screw and tighten it
