CashFlow
®
520 changegiver Pocket Guide
28
,
MEI, 1996
Installing and Starting a Unit
Before installation
1. Check that the unit’s specifications are correct
for the host machine.
2. Ensure the unit’s modules assembled securely.
3. Check that the connector on the changegiver
loom matches the one on the host machine.
4. Confirm that the voltage of the power supply to
the changegiver is the same as in the keypad
window.
Fit the changegiver onto the locating
screws in the machine
1. Ensure that the unit is level on its three keyhole
mounting slots.
2. Check that the right-hand mounting screw is at
the top of the keyhole slot, and that the unit is level.
3. Press down the top cover flap and tighten this
mounting screw to secure the unit in place.
Tighten the screw in the
right-hand keyhole slot
to secure the unit in the
host machine
Note the model
number and serial
number before you
contact your MEI
distributor
Mounting points
