MEI CASHFLOW SC83 Page-15
www.meigroup.com Part # 252055088 G3
UPDATING SOFTWARE
CPM Downloading Procedure
1. After connecting the CPM to the Cashflow SC83 via the USB interface (refer to previous page
illustration), you are now ready to start the download procedure.
2. Press the square download button located on the front of the CPM. (see fig.2 on previous
page)
3. When downloading, the CPM will have a solid green and a flashing red LED, indicating the
CPM is busy. Once the dowload is complete, the LED on the CPM will change to solid green and
a solid red, indicating a successful download. The note acceptor will perform a run and stack and
the the LEDs on the CPM will turn off.
4. Disconnect the USB harness from the Cashflow SC83 once the LEDs on the CPM are off.
5. Once dowload is complete, the Cashflow SC83’s diagnostic LEDs will flash five times green
continuously until communication between the note acceptor and the machine is re-established.
Diagnostic Codes For The CPM
Led Codes:
solid
green
= CPM on
solid
green
+ flashing
red
= CPM busy
solid
green
+ solid
red
= upgrade complete
Error Codes:
flashing
green
= battery low
alternating flashing
green
and
red
= wrong product connected
solid
green
+ flashing
red 1 time
= notes reader error
solid
green
+ flashing
red 2 times
= CPM error
solid
green
+ flashing
red 3 times
= program error
☺
+
+
+
+
+
x 1
x 2
x 3
=
=
=
=
=
=
=
=
CPM on
CPM busy
upgrade
complete
battery low
wrong product
connected
bill reader
error
CPM error
program
error
LED Codes
Error Codes
(Do not disconnect CPM)
(Disconnect CPM)
