Operation
23
The status bar at the bottom of the screen provides the following information:
When setting a variable parameter, the following view appears:
The value of the parameter can then be varied by turning the rotary encoder within the
permissible range of values and pressing it briefly to confirm.
As the output voltage settings can be bipolar (depending on the operation mode),
the voltage value always has a positive or negative prefix.
To change the polarity, the voltage must first be reset to 0. The polarity can then
be selected, by continuing to rotate the rotary encoder anticlockwise.
Status bar
Adjusting the test or
measuring parameters
Remaining
battery capacity
System
information
(tap to view)
Firmware
version
Power supply status
… Mains operation
… Battery operation
Date / Time
