Operation
22
4
Operation
4.1
Switching On the System
As soon as the device receives voltage through the power supply socket,
it
automatically starts charging the battery. A corresponding message appears on the
display.
The HVB 10 is started by pressing the on/off push-button
. After a few seconds, the
system is ready for use. The main menu appears in the display.
In this state, the high voltage source is still switched off and the high voltage output
earthed via a discharge resistor.
4.2
General Operation
Navigation within the menus is accomplished almost entirely via the circular selection
menu:
The operation of the system with the rotary encoder
is as follows:
•
Select a menu item
•
Increase or decrease the value of a variable parameter
•
Call up the selected menu item
•
Confirm the settings made
Alternatively, almost all the steps can be accomplished directly on the touch screen.
Navigation within the
menus
Test
Current
Description of the
selected menu item
Currently selected
menu item
Back to a higher menu
level
