www.megger.com
DLRO10HD and DLRO10HDX
14
Tests
Manual Bi-directional Test
AUTO
3s
2.5
Ω
250
mΩ
µA
100
2.5
kΩ
1mA
10mA
100
mA
1A
1A
10A
10A
250
Ω
25
Ω
2.5
Ω
250
mΩ
25
mΩ
2.5
mΩ
Tip:
Use Clamp test leads (optional accessory).
Note:
In Manual test mode both the Current and Voltage test leads must be connected across the test piece
before
TEST
is pressed.
1. Press
TEST
(acknowledged by a beep sound).
Test starts (LED shows red).
TEST
Arrow direction animated (based on current direction)
and plateau.
Test result for the currently connected test piece is
shown.
2.
DLRO10HDX only
: Save test results (if required).
Press
. The test result is saved and the memory slot
number is shown.
The Save screen is shown for three seconds.
3. If the test piece is still connected, press
TEST
to do
another test.
4.
DLRO10HDX only
: Press
as required.
